Olympus WS-320M - Backlight (Backlight)

77
5
Backlight (Backlight)
The recorder display backlight is On by default. The display will remain lit for about 10 seconds
when a button on the recorder is pressed.
1
Press the + or
–
button in the sub
menu screen, and select the
“Backlight”.
See ☞ P.38, 68, 75 regarding the sub menu.
2
Press the OK or 9 button.
The backlight setup process begins.
3
Press the + or
–
button to choose
between “On” and “Off”.
On: Backlight is enabled.
Off: Backlight is disabled.
4
Press the OK or 0 button to
complete the setup screen.
5
Press the STOP button to close the
menu.
Backlight (Backlight)