Olympus WS-801 - Page 54

54
5
EN
Menu setting method
Menu setting method
• Pressing the 0 button without
pressing the ` OK button cancels the
setting process and returns you to the
previous screen.
8 Press the STOP ( 4 ) button to
close the menu screen.
• If the menu screen is open during
recording or playback, pressing the
STOP ( 4 ) button allows you to return
to the recording or playback screen
without interrupting recording or
playback.
Notes
• The recorder stops if you leave it idle for 3
minutes during a menu setup operation
and do not set a selected item.
• When menu settings are entered during
recording or playback, the menu settings
are canceled if 8 seconds elapse with no
buttons being pressed.
4 Setting menu during playback:
Function Setting
[ Property ]
To menu item
options
[ Voice Playback ] *2 *4
[ Noise Cancel ] *4
[ Voice Balancer ] *2 *4
[ Voice Filter ] *3 *4
[ Play Mode ]
[ Equalizer ] *5
[ Skip Space ]
[ Play Scene ]
[ Backlight ]
[ LED ]
4 Setting menu during FM radio
reception (WS-803 only):
• During recording in [ FM Radio ]
mode, only the [ Backlight ] and [ LED ]
settings are available.
Function Setting
[ Rec Mode ]
To menu item
options
[ Auto-preset ]
[ Scan Level ]
[ Backlight ]
[ LED ]
[ Output ]
*1 WS-803 only.
*2 WS-803, WS-802 only.
*3 WS-801 only.
*4 Function active only in [ Recorder ] mode.
*5 Function active only in [ Music ] mode.
4 Setting menu during recording:
Function Setting
[ Rec Level ]
To menu item
options
[ Zoom Mic ] *1
[ Low Cut Filter ]
[ VCVA ]
[ Backlight ]
[ LED ]