78
6
EN
Operating environment
Operating environment
Precautions on using the recorder connected to a PC
• When you are downloading a file from the recorder or uploading a file to the recorder,
do not remove the USB cable even if the screen is indicating you can. Data is still being
transferred while the LED indicator light is blinking. When removing the USB cable, be sure
to follow the description in ☞ P.80. If the USB cable is removed before the drive is stopped,
data may not be successfully transferred.
• On a PC, do not format the drive of the recorder. Initialization is not successfully achieved
on a PC. For initialization, follow the instructions in the [ F o r m a t ] display of the recorder
( ☞ P.74).
• Folder (directory) names that appear in file management tools such as Explorer in
Microsoft Windows and Finder in Macintosh are different from the folder names that can
be set with the recorder.
• If folders or files stored on the recorder are moved or renamed by using a file management
tool in Windows or Macintosh, the order of files may change or files may become
unrecognizable.
• Data can be written or uploaded to the recorder even though the attribute of the recorder
drive is shown as Read-only by the operating system of the PC.
• As noise may cause adverse effects on electronics devices near the recorder, unplug the
external microphone and earphones when you connect the recorder to a PC.
To Next Page
Loading...
Need help?
General
