14
User Manual Built-in Oven
Installing Your Oven
Installation of Built-in Ovens
In order to ensure that the built-in appliance functions properly,
the cabinet containing it must be appropriate. Figure 1 below
gives the dimensions of the cut-out for installation under the
counter, while Figure 2 shows the dimensions needed for a wall
cabinet unit.
• In order to ensure adequate ventilation, the back panel of the
cabinet unit must be removed. Installing the oven so that it
rests on two strips of wood is preferable. If the oven rests on a
continuous, flat surface, there must be an aperture of at least
45×560mm at the rear.
• To fasten the oven to the cabinet, open the door of the oven
and attach it by inserting the 4 wooden screws into the 4 holes
located on the perimeter of the frame.
W
W
H
H
D
D
G
I
I
G
J
J
W 596
D Proud: 520
H 596
I 180
G 22
D Flush: 580
J 45
W 596
D Proud: 520
H 596
I 180
G 22
D Flush: 580
J 45
Minimum inside cavity (mm) Fig. 1 Minimum inside cavity (mm) Fig. 2
To Next Page
Loading...
