Omeo Evolution 1.1 - Monthly Checks

SECTION 14 OWNER’S MAINTENANCE SCHEDULE
107
|
OMEO EVOLUTION USER MANUAL
Procedure Action Standard
Inspect Wheel Guards for cracks,
obstructions, debris
Visual inspection
Check Tyre pressure and wear Close visual inspection
Standard :15psi
All-Terrain: 4psi
Wear indicated by:
• Centre rib is not worn flush with the
tyre surface
• Tyre thread depth is no less than
2.38mm (3.32in.)
Check operational
1. Power on
2. Ride briefly checking all controls
3. Document usage hours / km / mi
each month
Check torque on screws Batteries 1.6N-m
Check torque on wheel nuts Wheel Nuts 30N-m
InfoKey™ Controller
Battery level
Functions
Seat seal
Inspect around dust cover for cracks,
debris, wear and tear
Contact Authorised Omeo Agent for
replacement
Seat mounting bolts Check for tightness
Batteries if not used
Check the level on the InfoKey™
Controller or the Display Panel
If necessary, charge until full
Monthly Checks