SECTION 10 SERVICING YOUR OMEO EVOLUTION
83
|
OMEO EVOLUTION USER MANUAL
Service Procedures
Segway Components
Refer to the Segway PT User Manual (Pg. 104).
Removing the Segway
Lithium-ion Batteries
Refer to Segway PT User Manual (Pg. 106).
Checking Tyre Inflation Pressure
The tyre pressures for the Omeo Standard and
All-Terrain are as for the Segway (Refer to Table 1:
Omeo Specifications, Pg. 18).
Make sure the Omeo is powered o and in a stable
upright position with the Stabilising Legs down in
the first instance (see Figure 39).
NOTICE
As the valve system is visible there is no need
to tip the Omeo onto its side to check the
tyre inflation pressure. A slight rotation of
the Wheel may be required to allow the best
location / access to the valve system.
There are no wheel caps on the Omeo wheels.
Figure 39: Checking the tyre inflation pressure.
Tyre valve system
To Next Page
Loading...