How to fix a blank handset screen on my Omitec OmiSmoke?
If the Omitec Test Equipment handset screen is blank, it could be due to low battery voltage or the handset not receiving power. Try charging the battery by attaching an external power supply or charger. Also, inspect the fuse and cable for any issues.
What to do if Omitec Test Equipment self test fails due to low battery?
If the Omitec Test Equipment self-test fails, and the battery level is below 10.5V, try attaching an external power supply or charger.
General| Brand | Omitec |
|---|---|
| Model | OmiSmoke |
| Category | Test Equipment |
| Language | English |
Describes the handset and smokemeter units and their key features.
Critical warnings for safe operation, handling, and environmental considerations.
Covers PC requirements, software installation, and device battery charging.
Explains how to perform emissions tests using the handset or a PC.
Covers essential pre-test checks and the MOT FAS test procedure.
Details on performing Peak, Continuous, FAS, and Fast smoke tests.
Performing linearity tests and accessing diagnostic information.
Instructions for cleaning the smokemeter, handset, and linearity filter.
Covers printer paper replacement, battery replacement, and calibration.
Explains common errors, their causes, and recommended solutions.
Lists available spare parts and optional accessories with part numbers.
To Next Page