Omnia-6ex Use and Operation Manual – V: 1.20
10
Remote Interface: Configuration: Eight (8) inputs, RS-232 level-compatible.
Software sensing of both 'go-high' and 'go-low' transitions.
Inputs are protected to +/- 15 VDC.
Connector: EMI suppressed DE-9 male.
Control: User-programmable using built-in Trigger Script feature in
Omnia 6 Remote Control software. Virtually any parameter of
the Omnia 6 may be programmed to change through this interface
feature.
Power Requirements: Voltage: 100-250 VAC, 50/60/440 Hz., < 75VA
Connector: EMI suppressed IEC male. Detachable 3-wire power cords supplied
for US and European use.
Internal Power Supply: Overvoltage and short circuit protected. Meets EN55022, EN55011
Level B Conducted Emissions. EN61000-4-2, -3, -4, -5, -6 level 3
immunity compliant. Full international safety approval. CE marked.
Environmental: Operating Temperature: 32 to 122 degrees F / 0 degrees to 50 degrees C for all
operating voltage ranges.
Humidity: 0-95% RH, non-condensing.
Dimensions: 19” wide x 5.25” high x 16” deep (48.26cm wide x 13.335 cm high x
40.64 cm deep) including connectors. Unit requires three EIA rack
spaces for proper mounting.
Shipping Weight: 35 lbs. / 15.876 kg
Telos/Omnia Research and Development is constantly working to improve the quality of our products.
Actual specifications are subject to change or improvement without notice.
To Next Page
Loading...
Need help?
General
