Omnia 6FM User Manual

OMNIA – 6FM
Broadcast Audio Processor
Installation and Operation Manual
Version 1.00a
January 2002
Omnia ● 2101 Superior Avenue Cleveland, Ohio 44114 USA
TEL: +1 216.241.7225 ● FAX: +1 216.241.4103 ● Email info@omniaaudio.com www.omniaaudio.com
Omnia Europe ● Johannistrabe 6 D-85354 Freising Germany
TEL: +49 8161 42467 ● FAX +49 8161 42402 ● Email: europe@omniaaudio.com www.omniaaudio.com

Omnia 6FM Specifications

General

Brand	Omnia
Model	6FM
Category	Computer Hardware
Language	English

Summary

Installation and Connections

Pre Installation Tasks

Details common procedures for installing the Omnia-6fm processor.

PC Card & Modem Installation

Explains how to install the PC Memory Card and Modem Card.

Rack Mounting

Covers rack mounting requirements and installation procedures.

Rear Panel Connections

Details the various audio and digital input/output connectors on the rear panel.

Powering Up

Describes the unit's power-up sequence and status screens.

Omnia 6 User Interface

Main Menu Display

Details the main menu structure and navigation with the jog-wheel.

User Interface Tutorial: Input Source & Peak Level

Preset Management

Input & Output Submenus

System Settings

Processor Location and Setup

Processor Location

Discusses important considerations for placing the processor.

Fine Tuning Your Sound

Processing Objectives and Loudness

Adjustment Procedure

Provides a step-by-step guide for adjusting processing parameters.

Increasing Loudness

Remote Control Software

Software Installation

Configuring Remote Control

Trigger Interface and Script Editor

Details the script editor for programming parameter changes.

Scripting via Interface Connector

Troubleshooting

HyperTerminal Port Setup

Audio Failure Alarms

Clearing NVRAM

Step-by-step procedure to clear NVRAM contents.

Narrowing Down Problems

Guides on preliminary troubleshooting steps to identify issues.