Omnia 6FM - Non-System Parameters

Omnia 6 Use and Installation Guide – Version 1.00a
91
91
Example: rename 21 BOOGY <enter> commands the Omnia-6 to rename preset number 2.
save Saves the preset under its current name.
Note: Factory presets are permanent and cannot be written
over. You must use the ‘saveas’ command when saving
changes made to a factory preset in order to save it as a unique
name.
saveas Saves the preset under a different name.
Example: saveas BOOGY <enter> Commands the Omnia to save the current settings as preset
BOOGY.
Non-System Parameters (paras)
paras Lists the modifiable parameters available for the current preset
in a table format.
Example: paras <enter> displays the parameters for the current preset:
paravalues <index #> Lists all possible values for the parameter at the given index
number.
para <para index #> <paravalue> Sets a new value for the selected parameter.