Omnia 6 Use and Installation Guide – Version 1.00a
87
87
Trigger LOW is sensed. When nothing is connected to the Trigger Inputs, the inputs normally sit at
approximately 3.5 volts, which is a logic HIGH.
What Can Trigger Scripts Control?
Virtually any aspect of the Omnia 6 operation can be controlled using the Trigger Script function.
Therefore, we'll explain some of the different types of operations that can be performed, and the different
types of commands that are required to perform each one.
Some Common Usage of Trigger Scripts
• Switch from Stereo to L+R Mono
• Switch from L+R Mono to Stereo
• Switch the Stereo Pilot off
• Switch the Stereo Pilot back on and at 9% injection
• Switch the Omnia's audio input source from Analog to Digital
• Switch the Omnia's audio input from Digital to Analog
To Next Page
Loading...
