Omnia 6FM - Normal Boot up Message

Omnia 6 Use and Installation Guide – Version 1.00a
101
101
Normal Boot-up Message
A 'healthy' Omnia 6 will transmit the following message on the rear-panel serial port during boot up:
Omnia BIOS Software 1.13
Work: BIOS v1.13...
Work: Downloading OS...
Work: Downloading OS...
Work: Downloading OS...
Work: Downloading OS...
Work: Downloading OS...
Work: Downloading OS...
Work: Downloading OS...
Work: Downloading OS...
Work: Omnia 6.01.00...
Work: Omnia 6.01.00... May vary as a function of installed software version
Work: System Storage...
Work: Omnia Card...
Work: Preset Table...
Msg : set preset RocknRoll (alg old:(null) alg new:fm_6band)
Work : Load Algorithm...
Work: Load Algorithm...
Work: Load Algorithm...
Work: Load Algorithm...
Work: Load DSPs...0 Varies according to preset selected
Work: Load DSPs...1
Work: Load DSPs...2
Work: Load DSPs...3
Work: Load DSPs...4
Work: Load DSPs...5
Work: Load DSPs...6
Work: Load DSPs...7
Work: Load DSPs...8
Work: Load DSPs...9
Work: Load DSPs...10
Work: Load DSPs...11
Work: Load DSPs...11
Work: Load DSPs...11
Work: AES/EBU...
ERROR: Error initializing AES/EBU. (Ignore this message on O6.)
Work: IO Card...
Work: Command System...
Work: Graphics...
Work: Graphics...