Direct Serial: Standard RS-232, no hardware handshaking employed. Baud rates of
9,600, 19,200, and 57,600 supported.
TCP/IP Ethernet: Emulates a Telnet session.
Connectors: RS-232 port, EMI-suppressed DB-25 female connector. Industry
standard EMI suppressed RJ-45 connector for Ethernet.
Remote Control Trigger Interface
Configuration: Eight (8) inputs, RS-232 level-compatible.
Software sensing of both 'go-high' and 'go-low' transitions.
Inputs are protected to +/- 15 VDC.
Connector: EMI suppressed DE-9 male.
Control: User-programmable using built-in Trigger Script feature in included
Omnia 6 Remote Control software. Virtually any parameter of the Omnia
6 may be programmed to change through this interface.
Miscellaneous
Power Requirements
Voltage: 100-250 VAC, 50/60/440 Hz., 50VA
Connector: EMI suppressed IEC male. Detachable 3-wire power cords supplied for
US and European use.
Internal Power Supply
Overvoltage and short circuit protected. Meets EN55022, EN55011
Level B Conducted Emissions. EN61000-4-2, -3, -4, -5, -6 level 3
immunity compliant. EN60950, VDE0805, IEC950, UL1950, BABT, CSA
C22.2 No. 950 Approvals. Full international safety approval. CE marked.
MTBF – 150,000 hours minimum per MIL-HDBK-217F.
Environmental
Operating Temperature: 32 to 122 degrees F (0 to 50 deg. C) for
specified operating voltage ranges.
Humidity: 0-95% Relative Humidity, non-condensing.
Dimensions
19" wide x 5.25" high x 16" deep (48.26cm wide x 13.335 cm high x
40.64 cm deep) including connectors. Unit requires three EIA rack
spaces for proper mounting.
Shipping Weight: 35 lbs. / 15.876 kg
Telos/Omnia Research and Development is constantly working to improve the quality of our
products. Actual operating specifications are subject to change or improvement without notice.
To Next Page
Loading...
