Omnia Omnia-3

Omnia-3
Audio Processor
Installation and Operation Manual
Version 2.1 / June 2005
Applicable to fm Turbo, am and net/drm styles
with v3.04.01 Release Software and Higher
A Telos Company
Omnia ● 2101 Superior Avenue Cleveland, Ohio 44114 USA
TEL: +1 216.241.7225 ● FAX: +1 216.241.4103 ● Email: info@omniaaudio.com
www.omniaaudio.com
Omnia Europe ● Johannistraβe 6 D-85354 Freising Germany
TEL: +49 8161 42467 ● FAX +49 8161 42402 ● Email: europe@omniaaudio.com www.omniaaudio.com

Omnia Omnia-3 Specifications

General

Brand	Omnia
Model	Omnia-3
Category	Computer Hardware
Language	English

Summary

SAFETY INSTRUCTIONS

General Safety Instructions

All safety and operating instructions must be read before operating the product.

HAZARD WARNING LABELS

Understanding Warning Symbols

Explanation of hazard symbols such as Exclamation Point and Lightning Flash.

Omnia-3 Quick-Start Setup Guide

Initial Setup Steps

A quick guide to get the Omnia-3 up and running as quickly as possible.

Chapter 3: Processing Overview

The Omnia-3 and Audio Processing

Chapter 7: Editing Presets

Preset Editing Overview

Guide to tailoring processing presets for custom sounds.

Parameter Editing

Detailed adjustments for each processing parameter via the menu system.

Saving, Renaming and Deleting Presets

Chapter 8: Remote Control for v3.4.x (FM Turbo Style)

Chapter 9: Remote Control for v3.3.x and Earlier (NET, AM and FM Styles)

Software Installation

Setting Up and Configuring Omnia Remote Control

Using the Remote Control

Chapter 10: Troubleshooting

Omnia Messages

Explains boot-up messages and potential errors.

Diagnostic and Error Messages

Details on front panel and serial port error messages.

Narrowing down problems

Systematic approach to identifying and resolving operational issues.

Obtaining Service

Contacting Omnia Customer Support

Information on how to get support and service from Omnia.