Omnia Omnia-3 User Manual

10
Table of Contents
HAZARD / WARNING LABELS 4
Manual Update Notification 6
SPECIFICATIONS 7
Omnia-3 Quick-Start Setup Guide 11
Chapter-1: Installation 12
Pre-Installation Tasks.............................12
Installation & Connections ....................14
Powering Up ..........................................17
Chapter 2: The User Interface 18
Using the Jog Wheel..............................18
Main Menu Orientation..........................19
User Interface Tutorial...........................19
User Interface Concepts.........................21
Bargraph Display Metering Screens......22
Menu Descriptions.................................23
Chapter 3: Processing Overview 30
The Omnia-3 and Audio Processing......30
Chapter 4: Omnia-3fm Turbo 32
Processor Location.................................32
Omnia-3fm Turbo Connections.............33
Processing Presets..................................35
Omnia-3fm Turbo System Adjustments35
FM Turbo Processing Worksheet 38
Chapter 5: Omnia-3am 39
Processor Location.................................39
Processing Presets..................................39
Omnia-3am System Adjustments ..........40
AM Processing Worksheet 43
Chapter 6: Omnia-3net/drm 44
Omnia-3net/drm Connections................44
Omnia-3net/drm System Adjustments...44
NET Processing Worksheet 45
Chapter 7: Editing Presets 46
Preset Editing Overview ........................46
The Processing Display..........................47
Parameter Editing...................................49
Saving, Renaming and Deleting Presets53
Getting The Sound You Want................53
Chapter 8: Remote Control for FM Turbo 57
Software Installation..............................57
Setting Up and Configuring Omnia
Remote Control......................................58
Using the Remote Control .....................64
Using a Terminal Program and Direct
Connection.............................................65
Trigger Interface and Script Editor........66
Chapter 9: Remote Control for v3.3.x and
Earlier 74
Software Installation..............................75
Setting Up and Configuring Omnia
Remote Control......................................75
Using the Remote Control .....................81
Using a Terminal Program and Direct
Connection.............................................82
Trigger Interface and Script Editor........83
Chapter 10: Troubleshooting 92
Omnia Messages....................................93
Diagnostic and Error Messages
Electrical and mechanical safety note! ..95
Narrowing down problems ....................96
Obtaining Service...................................97
WARRANTY 98

Omnia Omnia-3 Specifications

General

Brand	Omnia
Model	Omnia-3
Category	Computer Hardware
Language	English