58
This message is normal the first time the program is started!
Note: When you install Omnia Remote Control software updates, you should move the old version and its
associated connect.dat file to a new folder. This way, conflicts with different versions of the connect.dat
database will be avoided. If you wish, the old version’s folder can be safely deleted once the update is complete.
You will also want to use unique folder names for each copy of other Omnia remote control programs if you
have those installed. Please note that the remote control programs themselves, as well as their associated
connect.dat files are unique for each version of the Omnia Classic, Omnia 3, Omnia-5EX, Omnia-6EX and
Omnia Toolvox.
Setting Up and Configuring Omnia Remote Control
The Remote Control Program for the Omnia-3fm Turbo is specific to the Omnia-3fm Turbo. As stated earlier,
Omnia Remote Control programs designed for our other
Omnia family of products will not work with Omnia 3.
The latest versions of all Omnia remote control programs are always available free of charge through the
“Support” page of our web site: www.omniaaudio.com
Start the O3remoteXXX.exe program. As mentioned earlier, when the program is run for the first time, you
will get an error message saying: “No connection database, creating new database.” This is normal.
Checking the Version Number of your Omnia-3 Remote Control Program
You can check the version of your Omnia Remote control program by clicking on the “About” option under the
“Help” menu option.
The Omnia-3 Remote
Control version number
is shown here.
To Next Page
Loading...
Need help?
General
