Omnia Omnia-6EX / EXi - Normal Boot up Message

Omnia-6ex Use and Operation Manual – V: 1.20
106
Normal Boot-up Message
A healthy Omnia-6EX will transmit the following text on the rear panel serial port during boot up:
Omnia BIOS Software 1.13
Work : BIOS v1.13...
Work: Downloading OS...
Work: Downloading OS...
Work: Downloading OS...
Work: Downloading OS...
Work: Downloading OS...
Work: Downloading OS...
Work: Downloading OS...
Work: Downloading OS...
Querying motherboard...Rev. G or higher motherboard detected.
Work: Omnia 7.00.00...
Work: Omnia 7.00.00...
Work: System Storage...
Work: Omnia Card...
Work: Preset Table...
Msg: System: FM6 -- common: 1 specific: 1
Msg : set preset RocknRoll (alg old:(null) alg new:fm_6band)
Work: Load Algorithm...
Work: Load Algorithm...
Work: Load Algorithm...
Work: Load Algorithm...
Work: Load DSPs...0
Work: Load DSPs...1
Work: Load DSPs...2
Work: Load DSPs...3
Work: Load DSPs...4
Work: Load DSPs...5
Work: Load DSPs...6
Work: Load DSPs...7
Work: Load DSPs...8
Work: Load DSPs...9
Work: Load DSPs...10
Work: Load DSPs...11
Work: Load DSPs...12
Work: Load DSPs...13
Work: Load DSPs...13
Work: Load DSPs...13
Work: Done!
Work: AES/EBU...
Work: IO Card...
Work: Command System...
Work: Graphics...
Work: Graphics...