Omnia-6ex Use and Operation Manual – V: 1.20
5
CE CONFORMANCE – This device complies with the requirements of the EEC Council Directives: 93/68/EEC
(CE Marking); 73/23/EEC (Safety – low voltage directive); 89/336/EEC (electromagnetic compatibility).
Conformity is declared to those standards: EN50081-1, EN50082-1.
LITHIUM BATTERY CAUTION -- Danger of explosion if the internal battery is replaced
incorrectly. Replace only with same or equivalent type recommended by the manufacturer. Dispose of
used batteries according to the manufacturer's instructions.
USE OF SHIELDED CABLING -- To conform to the CE requirements for High Frequency
radiation, shielded cables must be used for all audio and data connections. For analog and digital
connections, the cable shield MUST be connected to the XLR-type connector shell, which is at chassis
ground potential!
To Next Page
Loading...
Need help?
General
