What to do if my Omnik Inverter shows a 'No Utility' error?
If your Omnik Inverter displays a 'No Utility' error, it means there's no AC voltage. Use a multimeter to measure the AC voltage and check the wires in the AC cable.
What does it mean when my Omnik Omniksol-4k-TL3 Inverter displays 'GFCI Device Fault'?
A 'GFCI Device Fault' on your Omnik Inverter indicates an issue with the inverter's GFCI detector. To resolve this, first restart the inverter to check if the issue clears. If the problem persists, try re-flashing the software. If neither of these steps works, the part or the entire inverter may need to be replaced.
Why does my Omnik Inverter show 'PV Volt Low'?
The 'PV Volt Low' error on your Omnik Inverter means the DC voltage is below 150V. To fix this, ensure correct installation by adding more panels. If the issue continues, try re-flashing the software. If the problem still persists, consider replacing the part or the inverter.
What should I do if my Omnik Omniksol-4k-TL3 displays 'PV Volt High'?
If your Omnik Inverter shows 'PV Volt High', it means the DC voltage is too high due to incorrect installation. Correct the installation by removing panels. If the problem continues, try re-flashing the software. If that doesn't work, you may need to replace the part or the inverter.
What causes an 'Island Fault' on my Omnik Inverter, and how can I fix it?
An 'Island Fault' on your Omnik Inverter occurs when there is no grid or the local grid frequency isn't stable. To resolve this, first restart the inverter after ensuring the local grid is stable. You can also try closing the protection from the inverter.
What does 'Ground Current Fault' mean on my Omnik Omniksol-4k-TL3 Inverter?
A 'Ground Current Fault' on your Omnik Inverter can be due to poor grounding or may occur on rainy days. Ensure the inverter is well-grounded. If the issue persists, consider changing to another standard with a wider protection range under authorization.
Why does my Omnik Omniksol-4k-TL3 Inverter show 'Bus Volt High'?
A 'Bus Volt High' error on your Omnik Inverter could be due to a wrongly measured test value, a software issue, or hardware malfunction. Try restarting the inverter first. If the problem persists, try re-flashing the software. If neither works, the part or inverter may need replacement.
Why does my Omnik Omniksol-4k-TL3 show 'Bus Volt Low'?
A 'Bus Volt Low' error on your Omnik Inverter could be caused by a wrongly measured test value, a software issue, or a hardware problem. Try restarting the inverter. If the issue remains, try re-flashing the software. If that doesn't solve it, you might need to replace the part or the inverter.
What does 'Consistency Fault' indicate on my Omnik Omniksol-4k-TL3?
A 'Consistency Fault' on your Omnik Inverter means the data detected by the master and slave CPUs is inconsistent. To address this, first restart the inverter to see if the issue clears. If it continues, try re-flashing the software. If the problem still occurs, consider replacing the part or the inverter.
What does 'Grid Volt Fault' mean on my Omnik Omniksol-4k-TL3 and how to fix it?
A 'Grid Volt Fault' on your Omnik Inverter means the grid voltage detection within a period is anomalous. Try changing the grid voltage protection range.
Describes the purpose of the manual and the inverters covered.
Explains the meaning of safety symbols like DANGER, WARNING, and CAUTION.
Provides critical safety warnings related to electrical shock and proper installation environment.
Lists the key features, benefits, and integrated protection methods of the Omnik inverter.
Guides on how and where to mount the inverter safely, including orientation and environmental factors.
Step-by-step instructions for physically attaching the inverter to the wall mount.
Critical safety warnings for electrical connections, emphasizing qualified personnel and avoiding live connections.
Details on connecting the AC output, including integrated RCD/RCM and assembly instructions.
Critical safety warnings and instructions for connecting DC input, including model-specific characteristics.
General| Model | Omniksol-4k-TL3 |
|---|---|
| Rated Output Power | 4000 W |
| MPPT voltage range | 120 V - 450 V |
| Max. AC power | 4000 W |
| Maximum AC Output Power | 4000 W |
| Output Frequency | 50/60 Hz |
| Weight | 12 kg |
| Protection Class | IP65 |
| Protection degree | IP65 |
| Number of MPPT trackers | 2 |
| Output Voltage | 230 V |
| Operating Temperature Range | -25°C to +60°C |
| Cooling Method | Natural convection |
To Next Page