What to do if my Omnik Omniksol-8KW-TL3-NS shows 'No Grid'?
If your Omnik Inverter displays a 'No Grid' error, it means the device isn't detecting voltage on the AC side. First, check the connection of the AC circuit breaker, AC fuse, and AC terminals to ensure they are properly connected.
Why is my Omnik Inverter showing Grid Overvoltage/Undervoltage?
The Omnik Inverter shows a Grid Overvoltage/Undervoltage error because the voltage on the AC side is exceeding the allowable range. Check if the grid voltage is within the specified limits.
General| Model | Omniksol-8KW-TL3-NS |
|---|---|
| Max. DC Voltage | 1000 V |
| Number of MPPTs | 2 |
| Rated Output Power | 8000 W |
| Output Frequency | 50 Hz / 60 Hz |
| Power Factor | >0.99 |
| Max Efficiency | 98.2% |
| Efficiency | 98.2% |
| MPPT Efficiency | 99.9% |
| Cooling Method | Natural Convection |
| Protection Class | IP65 |
| Max. DC Power | 8.8 kW |
| Maximum DC Input Power | 8800W |
| Input Voltage Range | 200 - 950 V |
| MPPT Voltage Range | 200-800V |
| Max. AC Power | 8 kVA |
| Maximum AC Output Power | 8800W |
| Operating Temperature Range | -25°C ~ +60°C |
| Nominal AC Voltage | 230 V / 400 V |
| Rated Output Voltage | 230 V / 400 V |
To Next Page