What to do if my Omnik Omniksol-6k-TL2-TH shows a 'No Utility' error?
If your Omnik Inverter displays a 'No Utility' error, it indicates that the grid is not connected. First, check the grid connection cables to ensure they are properly connected. Then, verify the grid's usability. If the grid is functioning correctly and the issue persists, the fuse inside the inverter might be open, requiring professional service.
How to fix an Over Temp Fault on my Omnik Omniksol-6k-TL2-TH?
An 'Over Temp Fault' on your Omnik Inverter means the internal temperature is too high. To resolve this, try to lower the ambient temperature around the inverter. Alternatively, move the inverter to a cooler location to help it cool down.
General| Rated Output Power | 6000 W |
|---|---|
| Max. DC Voltage | 600 V |
| MPPT Voltage Range | 200 - 500 V |
| Number of MPPT Trackers | 2 |
| AC Voltage Range | 180 - 280 V |
| Frequency | 50 / 60 Hz |
| Maximum Efficiency | 98.1% |
| MPPT Efficiency | 99.9% |
| DC Connection | MC4 |
| AC Connection | Terminal Block |
| Protection Degree | IP65 |
| Operating Temperature Range | -25°C to +60°C |
| Weight | 18 kg |
| Cooling Method | Natural Convection |
| Max. AC Power | 6600 W |
To Next Page