Each array is a matrix of Light Emitting Diodes (LED’s) designed to emit light of a specific brightness
(intensity) and color (wavelength). The switch on the front of the Omnilux new-U allows you to choose
between the RED light output, the INFRARED light output or the OFF position.
Omnilux new-U treatment unit – Switch Positions
Move the switch DOWN for RED light. Move the Switch UP for INFRARED light. Move the switch to the
CENTER position for OFF. Since infrared light is not visible to the eye, the Omnilux new-U has two yellow
LEDs (as shown above) which light up when the device is emitting infrared light.
OFF
RED
INFRARED
PAGE 3
To Next Page
Loading...
