Omnilux CLEAR User Manual

9 pages

Other manuals for Omnilux CLEAR

Quick Start Guide5 pages

Questions and Answers:

S
Samantha PalmerJul 28, 2025
What to do if there is no blue or red light from my Omnilux CLEAR Personal Care Product?
- E
  elizabeth36Jul 28, 2025
  If your Omnilux CLEAR Personal Care Product isn't emitting blue or red light, it might not be charged. Ensure the controller is properly connected to the charger until all three indicator LEDs on the controller are steadily lit and no longer flashing. Another potential cause is that the device is connected to an electrical outlet. If so, unplug the USB connector from the controller.
C
Christina DeckerAug 13, 2025
Why do the LEDs flicker continuously during treatment with my Omnilux CLEAR Personal Care Product?
- B
  Brandon RomeroAug 13, 2025
  Continuous LED flickering during treatment with your Omnilux CLEAR Personal Care Product may occur if the device is not fully inserted into the controller. Ensure that the controller and the Omnilux CLEAR device are correctly and securely connected.

Omnilux CLEAR Specifications

General

Product Type	LED Light Therapy Device
Treatment Area	Face
Power Source	Rechargeable Battery
Session Duration	10 minutes
Frequency	3-5 times per week
FDA Cleared	Yes
Wavelength	415nm (Blue) and 633nm (Red)
Usage	Acne Treatment

Summary

2. Who should use Omnilux CLEAR?

3. Device description

3.1. Intended use

Specifies the device's approved use for treating mild to moderate acne vulgaris on the face.

4. When should Omnilux CLEAR NOT be used?

4.1 Contraindications, warnings and precautions

Lists specific medical conditions, medications, and user groups for whom the device is not recommended.

5. Risks and benefits

5.1 Potential risks

6. First time setup

6.1 Unpacking and charging your Omnilux CLEAR

6.2 Connecting Omnilux CLEAR to the controller

6.3 Sensitization test

Crucial step-by-step guide to perform a skin test before first use to check for adverse reactions.

7. Using the Omnilux CLEAR device

7.3 Carrying out a treatment

Step-by-step instructions for performing a full treatment session, from skin preparation to post-treatment care.

8. Care and maintenance

8.3 Troubleshooting

11. Technical specifications

13. Warranty

13.1 Standard warranty

13.2 Warranty exceptions

13.3 What to do if your product is faulty

Related product manuals

Preview: Omnilux Clear-U

Omnilux Clear-U

Preview: Omnilux CONTOUR

Omnilux CONTOUR

Preview: Omnilux Men

Preview: Omnilux New-U