Omnitronic BOB Series User Manual

21
•
EN
Overview of all features
BOB-10A | Active 10" Subwoofer with DSP and Bluetooth
• 10" bassreflex subwoofer with DSP and 600 watts RMS power
• Flexibly extendable with BOB-4 satellites for 2.1, 4.1 and 8.1 configurations
• DSP-controlled class D amplifier (300 W + 2 x 300 W)
• Integrated Bluetooth audio streaming
• 4 EQ presets with indicators
• Signal limiter and crossover
• Signal inputs via combo jacks (XLR/6.3 mm jack) and RCA
• Parallel XLR outputs for linking further BOB systems or active systems
• Separate volume controls for subwoofer and satellites L/R
• Stereo/mono selection
• Phase reversal switch
• Fault, limit, signal and power indicators
• Built-in protection circuits: soft start, short-circuit, limiter, overcurrent, overheat
• Two M20 metal flanges or mounting satellite speakers
• MDF enclosure with scratch-resistant lacquer surface and steel grille
• Built-in handles and low weight for ease of transport
• Stackable via recesses when set up horizontally
• Delivery includes two speaker cables
• For mobile live and DJ applications and installation in bars, stores, conference rooms and home theaters
BOB-4 | 4" Satellite Speakers
• 16-ohm speaker pair with 4" full-range speaker
• For use with BOB-10A subwoofers for 2.1, 4.1 and 8.1 configurations
• Incl. 2 x U-bracket for wall, ceiling and stand installation
• Optional stand adaptor required for stand mounting
• Extension U-bracket and cable available for connecting 2 satellite speakers
• Rated power: 75 W RMS/150 W program
• Connectors: 1 x speaker and screw plug terminal
• ABS plastic cabinet with M8 threaded inserts
• Scratch-resistant lacquer surface and steel grille
• Transport bag for 4 satellites, brackets and cables optional
BOB-10X | Passive dual 8" subwoofer for the BOB series
• 2 x 150 watt RMS rated power
• 125 dB maximum SPL
• Ideal bass addition for BOB satellite speakers
• Optimized for use with 4 satellites in combination with a 2-channel amplifier
• Frequency range: 50-200 Hz (-10 dB), integrated crossover network
• 2 x satellite speaker outputs with high-pass filter
• Inputs and outputs via spring clamps
• M20 metal flange for mounting satellites
• MDF enclosure with scratch-resistant lacquer surface and steel grille
• Built-in handles for ease of transport
• For installation in bars, stores, conference rooms and home theaters

Omnitronic BOB Series Specifications

General

Brand	Omnitronic
Model	BOB Series
Category	Speakers
Language	English