Omron BP7350 User Manual

36
7. Error Messages and Troubleshooting
appears or the
monitor is
turned off
unexpectedly
during a
measurement.
Batteries are depleted.
Immediately replace all 4
batteries with new ones.
Refer to sub-section 2.1.
Nothing
appears on the
display of the
monitor.
Batteries are depleted.
Battery polarities are not
properly aligned.
Check the battery
installation for proper
placement.
Refer to sub-section 2.1.
Readings
appear too high
or too low.
Blood pressure varies constantly. Many factors
including stress, time of day, and/or how you apply
the arm cuff, may affect your blood pressure.
Review sub-sections 2.3 - 2.5 and section 3.
Any other
communication
issue occurs.
Follow the instructions shown in the smart device,
or visit the “Support” section in the “OMRON
connect US/CAN” app for further help. If the
problem still persists, contact customer service.
Refer to section 12.
Any other
problems
occur.
Press the [START/STOP] button to turn the monitor
off, then press it again to take a measurement. If the
problem continues, remove all batteries and wait for
30 seconds. Then re-install batteries.
If the problem still persists, contact customer
service. Refer to section 12.
Display/
Problem
Possible Cause Solution

Omron BP7350 Specifications

General

Model Number	BP7350
Type	Upper Arm Blood Pressure Monitor
Bluetooth Connectivity	Yes
Irregular Heartbeat Detection	Yes
Hypertension Indicator	Yes
Average Reading Function	Yes
Measurement Method	Oscillometric
Movement Detection	Yes
WHO Classification Indicator	Yes
Display	LCD
Cuff Size	9 to 17 inches
Power Source	4 AA batteries
Weight	Approx. 400g (without batteries)
Memory Storage	Stores 120 readings (60 readings x 2 users) with date and time