Omron BP7350CAN - 3. Using Your Monitor without a Smart Device; Manual Measurement for High Systolic Pressure; Caution: Over-inflation Risk

3. Using Your Monitor without a Smart Device
23
EN
 If your systolic pressure is more than 210 mmHg
If your systolic pressure is more than 210 mmHg, take a
measurement manually.
After the arm cuff starts to inflate, press and hold the [START/STOP]
button until the monitor inflates 30 to 40 mmHg higher than your
expected systolic pressure.
Note
•Do not inflate above 299 mmHg.
Caution
• Inflating to a higher pressure than necessary may result in bruising of the arm
where the cuff is applied.