16
2. Preparation
2.3 Setting the Date and Time
•Set your monitor to the correct date and time before taking a
measurement for the first time.
•The date and time will automatically be set when the monitor is
paired with “OMRON connect US/CAN” app. Refer to sub-section
4.1.
•As soon as batteries are correctly installed, the year flashes on the
display of your monitor.
1. If nothing is displayed, press button (rear
surface of the monitor) to display the year.
If the year is already displayed, skip this step.
2. Press the or button to adjust the year.
Press and hold the button to quickly advance the years.
Press and hold the button to quickly go backwards through
the years.
To Next Page
Loading...
