Omron BP7450 User Manual

28
3. Using Your Monitor without a Smart Device
 Using the Guest Mode
Your monitor stores readings for 2 users in the memory. The guest
mode can be used to take a single measurement for another user.
Note
•No readings are stored in the memory, and the TruRead mode is not
available when the guest mode is selected.
1. Press and hold the
[START/STOP] button
for more than 3
seconds.
The user ID symbol and the date/time display will disappear.
2. Release the [START/STOP] button when the
user ID and date/time display turn off.
The arm cuff automatically starts to inflate.
 If your systolic pressure is more than 210 mmHg
If your systolic pressure is more than 210 mmHg, take a
measurement manually.
After the arm cuff starts to inflate, press and hold the [START/STOP]
button until the monitor inflates 30 to 40 mmHg higher than your
expected systolic pressure.
Note
•Do not inflate above 299 mmHg.
Caution
• Inflating to a higher pressure than necessary may result in bruising where the
arm cuff is applied.

Omron BP7450 Specifications

General

Model Number	BP7450
Type	Upper Arm Blood Pressure Monitor
Bluetooth Connectivity	Yes
Irregular Heartbeat Detection	Yes
Average Reading	Yes
Hypertension Indicator	Yes
Measurement Method	Oscillometric Method
Movement Detection	Yes
WHO Classification Indicator	Yes
Display	LCD Digital Display
Memory Storage	100 readings
Cuff Size	22-42 cm
Power Source	4 AA Batteries or AC Adapter
Weight	Approx. 400g (without batteries)