3. Remove the arm cuff.
4. Press the START/STOP button to turn the monitor off.
The monitor automatically stores the measurement result in its memory.
It will automatically turn off after 2 minutes.
Note: Wait 2-3 minutes before taking another measurement Waiting between measurements allows the
artenes to return to the condition prior to taking a measurement
using the Guest Mode
The monitor stores measurement values for 2 users in the memory The guest mode
can be used to take a single measurement for another user. No measurement values
are stored in the memory when the guest mode is selected.
1. Press and hold the START/STOP
button for more than 3 seconds.
The USER ID symbol and the DateITime display will disappear.
2. Release the START/STOP button when the DateITime
display turns off.
The arm cuff will start to inflate automatically.
12
To Next Page
Loading...
