3. Press the 1 or +
button to view the values stored in the
memory.
1 : To view the older valuBs
• ; To view the more recent values
Note: The value with the TruRead" symbol is the average for the consecutive 3 measurements To
display the individual measurement values, press the a button whlle the average is displayed.
To View the Average Value
1. Select your USER ID (1 or 2).
2. Press and hold the EP button for more
than 3 seconds.
Notes:
• lf the previous measurement was taken without setting the date and time,
the average value is not calculated.
• lf there are no measurement values stored in the memory, the screen to
the rlght is displayed.
15