Omron BP785N User Manual

11
2. Preparation
EN
2.4 Setting the Date and Time
Set the monitor to the correct date and time before taking a measurement for the first time.
1. Press the Date/Time setting ( ) button.
The year flashes on the Date/Time display.
2. Push or button to change the year.
Push button to confirm the year and then the month flashes. Repeat the same
steps to change the month, day, hour, and minute.
3. Press the START/STOP button to turn the monitor off.
Notes:
• If the batteries have been replaced, the date and time setting will need to be reset.
• If the date and time are not set, “-/ - -:--” appears during or after measurement.
Open the rear cover page to read the following:
The letter identifiers on the rear cover page correspond to those in the body of this page.
C
T
Year
Month
Day
Hour
Minute
Change Confirm
Change Confirm
Change Confirm
Change Confirm
Change Confirm
: Forward
: Back
HEM-7321-Z_C_M.book Page 11 Monday, June 16, 2014 12:09 PM

Omron BP785N Specifications

General

Type	Automatic
Cuff size	23 - 43 cm
Product color	Grey, White
Memory function	Yes
Number of users	2 user(s)
Memory registers	200
Placement supported	Upper arm
Mean arterial pressure	No
Display type	Analog
Battery type	AA
Number of batteries supported	4
Quantity per pack	1 pc(s)