Omron C200HX Series User Manual

Standard Models Appendix A
102
Name Model numberSpecifications
ID Sensor Units Local application, electromagnetic coupling C200H-IDS01-V1
Remote application; microwave transmissions C200H-IDS21
Read/Write Heads Electromagnetic type V600-H series
Microwave type V620-H series
Data Carriers SRAM type for V600-H series.
V600-DjjRjj
EEPROM type for V600-H series.
V600-DjjPjj
Voice Unit (see note 3) 60 messages max.; message length: 32, 48, or 64 s
(switchable)
C200H-OV001
Connecting Cable RS-232C C200H-CN224
Note: 1. When mounting a High-density I/O Unit as a Special I/O Unit to a Slave Rack, the Remote I/O Master
must be the C200H-RM001-PV1 or C200H-RM201.
2. The CV-series Programming Console can be used as a Teaching Box by replacing the Memory Pack of
the Programming Console.
3. Observe the following points when using the C200H-OV001 Voice Unit:
• The C200H-OV001 Voice Unit cannot be used when an OMRON display device (Programmable Termi-
nal) is connected to the peripheral port or the RS-232C port of a C200HX/HG/HE(-Z) CPU Unit in NT Link
mode. Connect the Programmable Terminal to the serial communications port of a C200HW-COMjj
Communications Board.
• When using a C200H-OV001 Voice Unit mounted on the PC, set the baud rate of the CPU Unit’s periph-
eral port or RS-232C port to 9,600 bps or less (regardless of the serial communications mode).

Omron C200HX Series Specifications

General

Brand	Omron
Model	C200HX Series
Category	Controller
Language	English