Omron CK3E Series - Page 112

Index
B
Basic Configuration........................................................... 1-3
C
Cleaning............................................................................ 6-2
Compatible Wires..............................................................
4-8
D
Daisy Chain............................................................ 4-23, 4-25
DIAG.MODE...................................................................... 3-3
E
Earthing Methods............................................................ 4-23
ECAT ACT......................................................................... 3-
3
ECAT LINK........................................................................ 3-3
Equipotential bonding system..........................................4-23
EtherCAT communications connector............................... 3-2
EtherCAT communications port operation indicators.........3-2
Ethernet ACT.....................................................................3-3
Ethernet communications connector................................. 3-2
Ethernet communications port operation indicators.......... 3-2
Ethernet LINK.................................................................... 3-3
F
Function grounding terminal.............................................. 4-8
G
Grounding.................................................................4-8, 4-23
grounding to 100 Ω or less................................................
4-9
I
Initial process error............................................................ 5-5
Initialization of the motion controller
..................................
5-7
Installation in cabinets or control panels............................4-5
M
Maximum number of controlled axes.................................2-2
Modbus-TCP communications..........................................
1-4
N
network topology..............................................................4-11
O
Operating Procedure......................................................... 1-6
P
Power PMAC IDE.............................................................. 1-5
Power PMAC-NC16 Runtime............................................
1-5
Power PMAC-NC16 SDK.................................................. 1-5
Power supply connector.................................................... 3-2
Power supply error............................................................ 5-5
Procedure for wiring power supply connector................... 4-9
PWR/ERR..........................................................................3-3
R
RDY................................................................................... 3-4
Recommended clamp core..............................................
4-20
Recommended Power Supply........................................... 2-5
recommended screwdriver................................................ 4-9
Recommended USB memoryRecommended USB memory..
....................................................................................... 2-5
S
Star earthing...........................................................4-23, 4-24
Support Software...............................................................
1-5
T
twisted-pair cable.............................................................4-13
U
Unit operation indicators....................................................3-2
USB 3.0 connector............................................................
3-2
W
Watchdog timer error......................................................... 5-5
Index
I-2
CK3E-series Programmable Multi-Axis Controller User’s Manual Hardware (I610)