55
Remote Mail Command Details Section 3-4
ErrorLogClear (Error Log Clear)
Function Clears the entire error log from the CPU Unit or a specified Special Unit (CPU
Bus Unit or Special I/O Unit).
Command Format
Response Format
Subject: ErrorLogClear
Notation Description Omission
Body: Para1:Unit address
Example)
Specifying a CPU Bus Unit (unit
number 0):
Para1:10
Specifies the unit address of the
Unit from which the error log will be
cleared.
Note If this parameter is omitted, a
parameter error will occur.
Cannot be omitted.
Attached file: None
Subject: Re:ErrorLogClear
Response contents Description
Body: Response Code:@@@@ Refer to 3-4-2 Response List.
Response Status:@@@@ Refer to 3-4-2 Response List.
> Para1:Unit address
Attached file: None
To Next Page
Loading...
