Omron E2E series - User Manual

Machine Automation Controller NJ-series
IO-Link Connection Guide
(EtherCAT(R) Host Communications)
OMRON Corporation
Proximity Sensor
(E2E-series IO-Link)
[IO-Link Master Unit]
OMRON Corporation
NX-series IO-Link Master Unit (NX-ILM[][][])
NX-series EtherCAT Coupler unit (NX-ECC20[])
P663-E1-01

Omron E2E series Specifications

General

Brand	Omron
Model	E2E series
Category	Network Hardware
Language	English

Summary

Precautions

Applicable Devices and Device Configuration

Applicable Devices

Lists compatible OMRON devices for the IO-Link system setup.

Device Configuration

Details specific hardware components and their versions for connection procedures.

Communications Settings

EtherCAT Connection Parameter

Specifies parameters for connecting the Controller and Slave Terminal via EtherCAT.

IO-Link Connection Parameter

Specifies parameters for connecting the IO-Link Master Unit and Proximity Sensor via IO-Link.

Device Variables

Defines I/O data (process data) allocated to the Controller's device variables.

IO-Link Connection Procedure

Slave Terminal Setup

Describes the procedure for setting up the Slave Terminal, including hardware and connections.

Network Configuration for Host Communications

IO-Link Master Unit Setup

Controller Setup

IO-Link Communication Status Check

Hardware Settings

Starting Sysmac Studio

Setting up the EtherCAT Network Configuration

Parameter Settings

I;O Allocation Settings

Setting the Device Variables

Transferring the Project Data

Checking the Connection Status

Checking the Receive Data

Initialization method

Initializing Controller

Initializing Salve Terminal