Need help?Do you have a question about the Omron SYSMAC CJ1W-SCU21-V1 and is the answer not in the manual?
General| Model | CJ1W-SCU21-V1 |
|---|---|
| Type | Serial Communications Unit |
| Number of Ports | 1 |
| Parity Check | None, Even, Odd |
| Manufacturer | Omron |
| Operating Temperature | 0 to 55 °C |
| Storage Temperature | -25 to 65 °C |
| Data Bits | 7, 8 |
| Stop Bits | 1 or 2 bits |
| Flow Control | RTS/CTS |
| Isolation | Photocoupler isolation |
| Applicable PLC | CJ1 Series |
| Power Supply | 5 VDC (supplied from the PLC backplane) |
| Compatible PLC Series | CJ1 Series |
| Protocol Support | NT Link, Host Link, No-protocol Mode |
| Baud Rate | 300 to 115200 bps |
Lists the relevant EC Directives, specifically EMC Directives and Low Voltage Directive.
Defines the concepts related to EMC Directives, emphasizing OMRON devices' conformity to standards.
Introduces the concept of unit versions for managing CS/CJ-series Serial Communications Units/Boards.
Describes how unit version codes are provided on product nameplates for CS-series Serial Communications Boards and Units.
Explains how to use the manual for Host Link, protocol macro, and 1:N NT link communications.
Provides an overview of the Serial Communications Boards and the Serial Communications Unit.
Details the various serial communications modes supported by Serial Communications Boards and Units.
Describes the features of the Serial Communications Boards, the Serial Communications Unit, and the protocols.
Explains the system configuration supported by each serial communications mode.
Provides detailed specifications for Serial Communications Boards and Units, including ports, protocols, and data exchange.
Compares CS/CJ-series Serial Communications Boards/Units with C200HX/HG/HE Communications Boards and Host Link Units.
Guides the user in selecting the appropriate serial communications mode based on the connected device.
Provides an overview of the basic operating procedures for installing and configuring the units.
To Next Page