Omron CS1G-CPU42H Replacement Guide From C200H To Cs

22
< Relay Output Units >
C200H-series Unit
Corresponding CS-series Unit
Description
Difference
C200H-OC225
CS1W-OC211
Relay Output Unit with
terminal block for 16 outputs.
1) Terminal block
2) No. of circuits (16 points/common x 1 circuit
→ 8 points/common x 2 circuits)
3) Output circuit specifications
ON/OFF response time (10 ms →15 ms)
Used relay
4) Internal current consumption
(5 VDC: 10 mA → 100 mA,
26 VDC: 75 mA → 96 mA)
250 VAC/24 VDC, 2 A,
Terminal block, 16 outputs
250 VAC/120 VDC, 2 A,
Terminal block, 16 outputs
C200H-OC226, OC226N
CS1W-OC211
Relay Output Unit with
terminal block for 16 outputs.
1) Terminal block
2) No. of circuits (16 points/common x 1 circuit
→ 8 points/common x 2 circuits)
3) Output circuit specification
Used relay
4) Internal current consumption
(5 VDC: 10 mA → 100 mA,
26 VDC: 90 mA → 96 mA)
250 VAC/24 VDC, 2 A,
Terminal block, 16 outputs
250 VAC/120 VDC, 2 A,
Terminal block, 16 outputs
< Transistor Output Units >
C200H-series Unit
Corresponding CS-series Unit
Description
Difference
C200H-OD411
CS1W-OD211
Transistor Output Unit with
terminal block for 8 outputs.
Replace this unit with a
Transistor Output Unit with 16
outputs.
1) Terminal block
2) Output points (8 points→ 16 points)
3) Output circuit specifications
Output capacity
(1 A/point, 3 A/Unit → 0.5 A/point, 8 A/Unit)
Voltage range (12 to 48 VDC → 12 to 24VDC)
Residual voltage (1.4 V → 1.5 V)
ON response time (0.2 ms → 0.5 ms)
OFF response time (0.3 ms → 1.0 ms)
4) Internal current consumption
(5 VDC: 140 mA → 170 mA)
12 to 48 VDC, 1 A, Sinking,
Terminal block, 8 outputs
12 to 24 VDC, 0.5 A, Sinking,
Terminal block, 16 outputs
C200H-OD213
CS1W-OD211
Transistor Output Unit with
terminal block for 8 outputs.
Replace this unit with a
Transistor Output Unit with 16
outputs.
1) Terminal block
2) Output points (8 points → 16 points)
3) Output circuit specifications
Output capacity
(2.1 A/point, 5.2 A/Unit → 0.5 A/point, 8 A/Unit)
Residual voltage (1.4 V → 1.5 V)
ON response time (0.2 ms → 0.5 ms)
OFF response time (0.3 ms → 1.0 ms)
4) Internal current consumption
(5 VDC: 140 mA
→
170 mA)
24 VDC, 2.1 A, Sinking,
Terminal block, 8 outputs
12 to 24 VDC, 0.5 A, Sinking,
Terminal block, 16 outputs
C200H-OD214
CS1W-OD212
Transistor Output Unit with
terminal block for 8 outputs.
Replace this unit with a
Transistor Output Unit with 16
outputs.
1) Terminal block
2) Output points (8 points → 16 points)
3) Output circuit specifications
Output capacity
(0. 8A/point, 2.4 A/Unit →
0.5 A/point, 5 A/Unit)
ON response time (1 ms → 0.5 ms)
4) Internal current consumption
(5 VDC: 140 mA → 170 mA)
24 VDC, 0.8 A, Sourcing,
Terminal block, Load short
circuit protection, 8 outputs
12 to 24 VDC, 0.5 A, Sourcing,
Terminal block, Load short
circuit protection, 16 outputs
C200H-OD216
CS1W-OD212
Transistor Output Unit with
terminal block for 8 outputs.
Replace this unit with a
Transistor Output Unit with 16
outputs.
1) Terminal block
2) Output points (8 points → 16 points)
3) Output circuit specification
Output voltage range (5 to 24 VDC →
24 VDC)
4) Internal current consumption (5 VDC: 10 mA
→ 170 mA, 26 VDC: 75 mA → 0 mA)
5) External power supply
(Not required → 24 VDC/40 mA)
5 to 24 VDC, 0.3 A, Sourcing,
Terminal block, 8 outputs
12 to 24 VDC, 0.5 A, Sourcing,
Terminal block, Load short
circuit protection, 16 outputs
C200H-OD211
CS1W-OD211
Transistor Output Unit with
terminal block for 12 outputs.
Replace this unit with a
Transistor Output Unit with 16
outputs.
1) Terminal block
2) Output points (12 points → 16 points)
3) No. of circuits (12 points/common x 1 circuit
→ 8 points/common x 2 circuits)
4) Output circuit specifications
Residual voltage (1.4 V → 1.5 V)
ON response time (0.2 ms → 0.5 ms)
OFF response time (0.3 ms → 1.0 ms)
5) Internal current consumption
(5 VDC: 160 mA → 170 mA)
24 VDC, 0.3 A, Sinking,
Terminal block, 12 outputs
12 to 24 VDC, 0.5 A, Sinking,
Terminal block, 16 outputs

Omron CS1G-CPU42H Specifications

General

Brand	Omron
Model	CS1G-CPU42H
Category	Controller
Language	English