Need help?Do you have a question about the Omron DRT2-AD04 and is the answer not in the manual?
General| Number of inputs | 4 |
|---|---|
| Input range | 0 to 10 V, 0 to 5 V, 1 to 5 V, 0 to 20 mA, 4 to 20 mA |
| Conversion Time | 1 ms per point |
| Power Supply Voltage | 24 VDC ±10% |
| Operating Temperature | 0 to 55°C (32 to 131°F) |
| Storage Temperature | -25 to 65 °C (with no icing or condensation) |
| Isolation | Between input and communication: photocoupler |
Identifies the intended audience for the replacement guide.
Details Omron's product warranty terms and limitations.
Outlines Omron's liability limitations for product use.
Clarifies buyer's responsibility for product application suitability.
States Omron's non-responsibility for user programming of products.
Explains the nature and use of performance data provided.
Informs about potential changes to product specifications.
States Omron's disclaimer for potential errors in documentation.
Describes the target customer profile for this replacement guide.
Lists the specific products covered in the guide.
Compares specifications for analog input terminals.
Compares specifications for analog output terminals.
Provides external dimension details for R7D series units.
Details switch settings for DRT2-AD04 and R7D-SV4 units.
Details switch settings for DRT2-DA02 and R7D-YV2 units.
Details switch settings for DRT2-DA02 and R7D-YS2 units.
Guides on wiring methods for DRT2-AD04 and R7D-SV4 units.
Guides on wiring methods for DRT2-DA02 and R7D-YS2 units.
Guides on wiring methods for DRT2-DA02 and R7D-YV2 units.
Steps for replacing a unit with fixed assignment.
Steps for replacing a unit with free assignment.
To Next Page
