Omron DRT2-AD04 User Manual

6
Intended Customer
・ A customer who has previously been designed a remote I/O communication system using DeviceNet and will be
responsible for replacing the unit from DRT2-AD04/DA02 to R7D-SV4/YV2/YS2 in the future.
・ Omron or your retailer's sales representative or SE that supports the introduction of the above customer.
Object product
Name
Type
DeviceNet master unit
Model CJ1W-CRM21
Model CS1W-CRM21
DeviceNet analogue-in terminals
Model DRT2-AD04
DeviceNet Analogue Out Terminals
Model DRT2-DA02
M-System Co., Ltd.
Remote I/OR7 Series
DC voltage/current input module
Model R7D-SV4
M-System Co., Ltd.
Remote I/OR7 Series
DC voltage output unit
Model R7D-YV2
M-System Co., Ltd.
Remote I/OR7 Series
DC current output unit
Model R7D-YS2
Included in CX-Programmer (Included in CX-One)
Included in CX-Integrator (Included in CX-One)
M-System Co., Ltd.
Configuration software
Model R7CON
M-System Co., Ltd.
PC configuration cable
Model COP-US

Omron DRT2-AD04 Specifications

General

Brand	Omron
Model	DRT2-AD04
Category	Touch terminals
Language	English