Omron DRT2-AD04

13
2.2 DRT2-DA02 and R7D-YV2
DRT2-DA02
R7D-YV2
Set the node address and output range
・Model DRT2-DA02
Setting the Node Address
Setting the Baud Rate
There is no setting.
Output condition at the time of communication error
Set in the Configurator.
Output range setting
Set the node address, communication speed, output at
communication interruption, and output range.
・Model R7D-YV2
Setting the Node Address
Setting the Baud Rate
Output condition at the time of communication error
Output range setting