Omron DRT2 Series User Manual

2
DRT2-ID16/OD16
DRT2-ID16/OD16
Features and Functions
Omron’s DRT2-series Smart Slaves do not just input and output
ON/OFF signals. They collect a variety of value-added information
to help increase the rate of operation without changing the wiring
for existing DeviceNet networks. In particular, they allow the sepa-
ration of control systems and maintenance systems so that main-
tenance systems can be created independently of control
systems.
PLC
Configurator
Control I/O
DRT2-series
Smart Slave
Pneumatic valve
Maintenance information
Easy-to-view
Display
2
3
Sensor
Cylinder
Control System Maintenance System
Maintenance SystemControl System
Operating time, contact operation
counter
Machine Operation
Monitored by Slave
Faster Maintenance
Work
1
The Slave can hold comments,
allowing quick identification of fault
locations and faulty devices.
The Slave Unit represents
machine operatin
g
time a
n
operational chan
g
es as d
a
enablin
g
monitorin
g
witho
u
increasin
g
the load betwe
e
controllers.
Smart Measurin
g
Smart Countin
g

Omron DRT2 Series Specifications

General

I/O Classification	Digital I/O
Output Type	Transistor (NPN or PNP depending on model)
Protection Degree	IP20
Operating Temperature	-10 to 55 °C (with no icing or condensation)
Mounting Method	DIN Rail Mounting
Digital Inputs	Yes
Digital Outputs	Yes
Current Consumption	Varies by model
Storage Temperature	-25 to 65°C (with no icing or condensation)
Insulation Resistance	20 MΩ min. (at 500 VDC)
Vibration Resistance	10 to 57 Hz, 0.075 mm amplitude, 57 to 150 Hz
Input Type	DC input
Number of Input Points	8, 16, or 32 (depending on model)
Number of Output Points	8, 16, or 32 (depending on model)
Weight	Varies by model
Shock Resistance	150 m/s^2, 3 times each in 6 directions
Humidity Range	35% to 85% (with no condensation)