Omron E3X-NA - Small Diameter Head Fiber Units; Flexible (Resists Breaking) Fiber Units (R4)

A-69E3X-NA
E3X-NA
Note: 1 . indicates a unit that can be cut freely. The unit without the mark cannot be cut freely.
2 . The values of the minimum sensing object for E3X-NA# (V) and E3X-NAG# through-beam models indicate those obtained where the sensing distance and
sensitivity are set to optimum values.
3 .The value of the minimum sensing object for E3X-NA#F through-beam models indicates that obtained at the rated sensing distance with the sensitivity set to
the optimum value.
4 .The size of standard sensing object is the same as the fiber core diameter (lens diameter for models with lens).
5 .The value of the minimum sensing object of the through-beam model assumes that the sensing distance and sensitivity are set to the optimum.
Small diameter head
Flexible (resists breaking) (R4)
Features Shape
Compatible
Amplifier
Units (E3X-)
Sensing distance (mm)
(Values in parentheses: when
using the E39-F1 Lens Unit)
Standard object (mm)
Minimum sensing object
(Opaque object) Typical
Model
Permissible
bending
radius
2.0 mm dia.
Minute work
detection
NA#(V)
0.5 mm dia.
(0.03 mm dia.)
E32-T22
10 mm
NAG#
NA#F
0.5 mm dia.
(0.1 mm dia.)
2 mm dia. Small
work detection
NA#(V)
0.5 mm dia.
(0.03 mm dia.)
E32-T22R
1 mm
NA#F
0.5 mm dia.
(0.1 mm dia.)
With 1.2 mm
dia. sleeve
NA#(V)
1.0 mm dia.
(0.03 mm dia.)
E32-TC200B
E32-TC200B4
25 mm
NAG#
NA#F
1.0 mm dia.
(0.2 mm dia.)
With 0.9 mm
dia. sleeve
NA#(V)
0.5 mm dia.
(0.03 mm dia.)
E32-TC200F
E32-TC200F4
10 mm
NAG#
NA#F
0.5 mm dia.
(0.1 mm dia.)
Features Shape
Compatible
Amplifier
Units (E3X-)
Sensing distance (mm)
(Values in parentheses: when
using the E39-F1 Lens Unit)
Standard object (mm)
Minimum sensing object
(Opaque object) Typical
Model
Permissible
bending
radius
Ideal for
mounting on
moving sec-
tions (R4)
NA#(V)
1.0 mm dia.
(0.03 mm dia.)
E32-T11
4 mm
NAG#
NA#F
1.0 mm dia.
(0.2 mm dia.)
NA#(V)
0.5 mm dia.
(0.03 mm dia.)
E32-T21NAG#
NA#F
0.5 mm dia.
(0.1 mm dia.)
NA#(V)
0.5 mm dia.
(0.03 mm dia.)
E32-T22BNAG#
NA#F
0.5 mm dia.
(0.1 mm dia.)
Free-cut
Free-cut
Red light Green light
Free-cut
2-mm dia.
100
20
30
Free-cut
2-mm dia.
60
18
Free-cut
1.2 dia.
M4 screw
( ): E32-
TC200B4
90mm(40mm)
400
75
120
Free-cut
M3 screw
0.9 dia.
90mm(40mm)
( ): E32-
TC200F4
100
20
30
Free-cut
M4 screw
360
65
100
M3 screw
100
18
30
1.5 mm dia.
100
18
30