Omron E5CC - Page 15

Simplicity on the Worksite Solutions Guide for FAQs: E5CC/E5EC
Setting Temperature Alarms
4-1
Setting Temperature Alarms
Setting Temperature Alarms
The procedure to set temperature alarms is given step by step in this section.
How To Select an Alarm Type
Consider the following three points and select the alarm type
from tables on page 4-3 and 4-4.
1. In what cases do you want to output an alarm?
2. Do you need to link the alarm temperature to the set point?
3. Do you need an alarm when the power is turned ON.
Alarm
E5CC/E5EC
Temperature
sensor
Select from the
table on page 4-3.
In what cases
do you want
to output an
alarm?
1.
●
Outputting an alarm when the temperature exceeds a specific value
Upper-limit
Alarm
ON
OFF
●
Outputting an alarm when the temperature goes below a specific
value
Lower-limit
Alarm
OFF
ON
●
Outputting an alarm when the temperature goes below a specific
value or exceeds a specific value
Lower-limit
Alarm
OFF
ON
Upper-limit
Alarm
ON
●
Outputting an alarm when the temperature is within a specific range
Upper-limit and
Lower-limit
Range Alarm
ON
OFF
OFF
→
Upper-limit
Alarm
→
Lower-limit
Alarm
→
Upper-limit and
Lower-limit
Alarm
→
Upper-limit and
Lower-limit
Range Alarm
1 Selecting the Alarm Type
Step 1 Determining the Alarm Set Value
Simplicity on the Worksite Solutions Guide for FAQs: E5CC/E5EC