A Appendices
A - 42
E5@C Digital Temperature Controllers User’s Manual (H174)
*22.1 Initialized only when the simple transfer output is set to Simple Transfer SP, Simple Transfer Ramp SP, or Simple
Transfer PV.
*22.2 Initialized only when the simple transfer output is set to Simple Transfer MV (Heating) or Simple Transfer MV
(Cooling).
*22.3 Initialized to the above default values regardless of the settings for changing the simple transfer output.
*23 If you change the temperature unit for the E5DC or E5DC-B, these values will be converted to the new temperature unit.
(The E5DC must be manufactured in July 2014 or later (version 2.2).)