19
4. USING THE MONITOR WITH A SMART DEVICE
Notes:
• If you use any other app instead of “OMRON connect US/CAN”, the date
and time may not be automatically set.
If you need to set the date and time, pair your monitor or transfer the data by
using “OMRON connect US/CAN” app.
• The date/time will only be set for future measurements taken after the
measurement that was transferred. It will not be saved to the measurement
that was just transferred.
• Please be aware that OMRON will not be responsible for the loss of data
and/or information.
To Next Page
Loading...
