Omron FS-C2KU7DGES-C User Manual

No.20S046-00
47/62
FS-C4KU7DGES-F / FS-C4KU7DGES-M42 / FS-C2KU7DGES-F / FS-C2KU7DGES-M42 / FS-C2KU7DGES-C
Product Specifications and Use’s Guide
3) How to use PTP
Selects “True” at GevIEEE1588 then synchronize camera time to “Master Clock” (synchronize time
is different depending on system). The camera is ready for action command after synchronize to
“Master Clock”.
4) Synchronized exposure for trigger mode
When action command generating, action command is broadcasting to each camera and camera starts
exposing.
Synchronized exposure does not secure if action command does NOT include Timestamp. If action
command includes Timestamp, action command will be scheduled automatically and each camera start
exposing at same time.
Action Control setting is required when action command generating.
IEEE1588
PTP supported
Switching HUB
PC
M
S S S S S
M: Master
S: Slave
S
e.g. PTP configuration

Omron FS-C2KU7DGES-C Specifications

General

Brand	Omron
Model	FS-C2KU7DGES-C
Category	Digital Camera
Language	English