Need help?Do you have a question about the Omron STC-MBS500POE and is the answer not in the manual?
General| Lens Mount | C-Mount |
|---|---|
| Sensor Type | CMOS |
| Focus | Manual |
| Shutter Type | Rolling Shutter |
| Interface | GigE (PoE) |
| Power | PoE (Power over Ethernet) |
| Lens Type | Not included |
| Image Sensor | 1/1.8 inch CMOS |
Explanation of graphic symbols used to convey warnings and cautions in safety instructions.
Details the licensing terms for the LWIP TCP/IP implementation used in the camera.
Highlights the key features and capabilities of the GigE Vision cameras.
Explains the naming convention used for camera models like STC-MxS500POE.
Provides detailed electronic characteristics and parameters for both camera models.
Graphs showing the relative spectral response of the monochrome and color sensors.
Details the physical dimensions, materials, and connectors of the cameras.
Outlines operational and storage conditions, vibration, shock, and compliance standards.
Pin assignment and LED status indicators for the RJ45 Ethernet connector.
Pin assignment and signal descriptions for the Power-I/O connector.
Detailed dimensional drawings and specifications for the STC-MBS500POE camera model.
Detailed dimensional drawings and specifications for the STC-MCS500POE camera model.
Illustrates how pixel data is transferred from the camera sensor for monochrome and color cameras.
Describes the camera's standard operational mode without specific trigger conditions.
Explains trigger operation based on the duration of the trigger signal's high or low state.
Details trigger mode where exposure duration is set by camera configuration.
Describes trigger behavior when input occurs during image readout, with disregard conditions.
Procedure for saving, loading, and initializing camera settings via GenICam commands.
Parameters for querying and controlling device properties and status information.
To Next Page