Omron STC-MBS500POE

No.18S111-03
50/70
STC-MBS500POE / STC-MCS500POE
Product Specifications and User’s Guide
10.13 Image Flip
The horizontal flip image can be selected by “Reverse X”.
The vertical flip image can be selected by “Reverse Y”.
GenICam Parameters
ReverseX IBoolean Type Horizontal flip image ON / OFF selection
Selection: “False” (Horizontal flip is Off), “True” (Horizontal flip is On)
Default: “False” (Horizontal flip is Off)
ReverseY IBoolean Type Vertical flip image ON / OFF selection
Selection: “False” (Vertical flip is Off), “True” (Vertical flip is On)
Default: “False” (Vertical flip is Off)
10.14 LUT Control
The output signal assigned table for input signal.
GenICam Parameters
LUT Selector IEnumeration Type Control LUT selection (Luminance is only selectable)
Default: Luminance
LUT Enabled IBoolean Type LUT ON / OFF selection
LUT Index IInteger Type Index for LUT
Range: 0 to 4,095
LUT Value IInteger Type The output value for input value that specifies by index
Range: 0 to 4,095
LUT Index
0 4095
LUT Value
4095
e.g. LUT usage (low brightness level enhancement)