EasyManua.ls Logo

Omron STC-MCS500POE User Manual

Omron STC-MCS500POE
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
No.18S111-03
1/70
STC-MBS500POE / STC-MCS500POE
Product Specifications and User’s Guide
GigE Vision
Monochrome / Color CMOS PoE Camera
STC-MBS500POE (5M / Monochrome)
STC-MCS500POE (5M / Color)
Product Specifications and User’s Guide

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Omron STC-MCS500POE and is the answer not in the manual?

Omron STC-MCS500POE Specifications

General IconGeneral
BrandOmron
ModelSTC-MCS500POE
CategoryDigital Camera
LanguageEnglish

Summary

Product Safety and Precautions

General Safety Warnings and Handling

Covers essential safety guidelines for camera usage, environment, and installation.

Warranty Information

Camera Specifications

Electronic Specifications

Details electrical characteristics, sensor data, frame rates, and output formats.

Connector and Signal Interfaces

Power and Control Signal Connector

Describes the 6-pin Power-I/O connector for power and signal I/O.

Triggering and Timing

External Trigger Delay Measurement

Explains and measures delays for external trigger signals with different polarities.

Camera Operational Modes

Camera Functions and Settings

Saving and Loading Camera Settings

Covers procedures for saving, loading, and initializing camera configurations.

Gain and Exposure Control

Details analog/digital gain, exposure time, and auto exposure settings.

Auto Light Control (ALC)

Explains auto gain and auto shutter for maintaining consistent image brightness.

GenICam Interface Commands

Device Control Commands

Lists commands for device information, status, and configuration.

Acquisition Control Commands

Commands for managing acquisition modes, triggers, and exposure.

Analog Control Commands

Commands for adjusting gain, white balance, and black level.

Related product manuals