Omron STC-MCS500POE

No.18S111-03
47/70
STC-MBS500POE / STC-MCS500POE
Product Specifications and User’s Guide
10.8 Gamma correction
The gamma correction is changeable.
GenICam Parameters
Gamma IFloat Type Gamma correction
Range: 0 to 4.0
Default: 1.0
10.9 ROI (Region of Interest)
The specified region of image can be output from camera with ROI function.
GenICam Paramters
Width IInteger Type Width (horizontal size) of output image (in pixel)
Range: 264 to 2,448
Default: 2,448
Adjustable steps: 8
(“Width” + “Offset X”) should not exceeded maximum width.
Height IInteger Type Height (vertical size) of output image (in line)
Range: 4 to 2,048
Default: 2,048
Adjustable steps: 4
(“Height” + “Offset Y”) should not exceeded maximum height.
OffsetX IInteger Type Horizontal offset for output image (in pixel)
Range: 0 to 2,184
Default: 0
Adjustable steps: 8
OffsetY IInteger Type Vertical offset for output image (in line)
Range: 0 to 2,044
Default: 0
Adjustable steps: 4
The ROI region settings are below:
Width
Height
OffsetX
OffsetY
ROI region